{"title":"REDARC","description":null,"products":[{"product_id":"12v-12a-in-trailer-dc-dc-battery-charger","title":"REDARC BCDC1212T 12V 12A In-Trailer DC-DC Battery Charger","description":"Charge your trailer batteries with this 12amp dump trailer charger from REDARC. Connecting directly to the trailer plug, the BCDC1212T provides 3-stage battery charging for optimum battery charge, protecting the truck's start battery from discharge while charging the auxiliary battery responsible for operating winches, hydraulic pumps, dump trailers, liftgates and boat trailers. Perfect for charging tipper trailer battery and liftgate charging this dump trailer charger is compatible with all battery makes and chemistries, including Standard Lead-Acid, Calcium, Gel, AGM and Lithium LiFeP04. It operates in a 12- or 24-volt vehicle and is 12 Amp input current limited to charge your secondary battery banks to 100% state of charge while on the move. Easily installed in the trailer's nose cone. The BCDC1212T ensures little to no mains charging is required for your trailer battery, meaning you can charge the trailer battery while you drive and reduce the need to plug into the socket to top-up battery charge. The BCDC1212T comes pre-wired with wiring harness allowing easy installation into any typical trailer battery setup, or other trailers where the secondary battery's charging current is drawn from the 12V Auxiliary Power available on a pre-installed, suitably rated, trailer plug and towing harness. Quality fuse kits for optimum performance REDARC offers a high quality 23amp fuse kit for input and 30amp fuse kit for the BCDC1212T output to ensure safe and efficient operation. Australian made and proven to operate under extreme heat of up to 176 deg F, this trailer battery charger is sealed to eliminate the risk of dust or water ingress, and is made in Australia by Australia's leading battery charging and overlanding accessories company.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187324387643,"sku":"JGHJ_BCDC1212T","price":491.76,"currency_code":"CAD","in_stock":true}]},{"product_id":"dc-dc-charger-12v-25a-in-vehicle-dc-dc-battery-charger","title":"REDARC BCDC1225D DC-DC Charger 12V 25A In-Vehicle DC-DC Battery Charger","description":"BCDC1225D In-vehicle Dual Battery Charger. It's a 12 volt, 25A in-vehicle DC-DC battery charger designed to charge your secondary battery banks to 100% state of charge while on the move. Additional features within this Solar Ready charger, such as a Maximum Power Point Tracking (MPPT) solar regulator and built-in Green Power Priority (primary solar selection), means you can charge your batteries using solar panels when driving or portable panels when stationary. With simultaneous DC and Solar inputs, this makes it the most advanced dual battery charger on the market today. Have the reassurance and confidence that your batteries will be charged to their optimal levels, thanks to a unique multi-stage charging algorithm that provides specific charging profiles tailored to all common battery types. The SEMA Global Media Awarding winning BCDC1225D is perfect for charging AGM, Gel, Standard Lead Acid, Calcium, and LiFePO4 batteries. The unit works with 12- or 24-volt vehicle systems and with either standard or variable\/smart alternators. This DC-DC battery charger with solar input has been proven to work in all types of terrains, including deep water crossings, and stands up against extreme heat (up to 176 deg F). It's fully sealed against the risk of infiltration from water and dust and will hold up to the adventure at hand. It's designed to maximize the performance and life of your auxiliary battery and is suited for battery bank sizes of 75-200AH in most applications. Made in Australia by REDARC this amazing range has undergone years of testing in some of the harshest conditions on the planet. REDARC has been in business for nearly 40 years and all of our products are made tough enough to take anything nature can throw at them.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187324453179,"sku":"JGHJ_BCDC1225D","price":759.84,"currency_code":"CAD","in_stock":true}]},{"product_id":"dc-dc-charger-12v-40a-in-vehicle-dc-dc-battery-charger","title":"REDARC BCDC1240D DC-DC Charger 12V 40A In-Vehicle DC-DC Battery Charger","description":"The REDARC BCDC1240D is a 12V, 40A In-vehicle DC to DC Battery Charger designed to keep your auxiliary battery charged when driving or with portable solar panels when parked. It uses multi-stage DC-DC charging, a system that allows optimum charging levels for your auxiliary battery. Dual Battery Charger with solar input The DC to DC battery charger works from a wide operating range (9-32V) and provides the option of charging from both 12V and 24V vehicle systems. Additional features include a Maximum Power Point Tracking (MPPT) solar regulator, which allows the maximum amount of power to be delivered from your solar panels to your auxiliary battery. This Solar Ready smart charger also acts a dual battery isolator. If the voltage gets too low, the start battery is protected. It's fan free creating a quiet operation, is fully sealed, and has multiple levels of fault protection. The SEMA Global Media Awarding winning BCDC1240D is perfect for charging AGM, Gel, Standard Lead Acid, Calcium, and LiFePO4 batteries. The in-vehicle dual battery range keeps your auxiliary battery banks charged to their optimal levels and lets you continue your adventure uninterrupted. This DC-DC battery charger with solar input has been proven to work in all types of terrains, including deep water crossings, and stands up against extreme heat (up to 176 deg F). It's fully sealed against the risk of infiltration from water and dust and will hold up to the adventure at hand. It's designed to maximize the performance and life of your auxiliary battery and is suited for battery bank sizes of 200AH and above in most applications. Made in Australia by REDARC this amazing range has undergone years of testing in some of the harshest conditions on the planet. REDARC has been in business for nearly 40 years and all of our products are made tough enough to take anything nature can throw at them.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187324584251,"sku":"JGHJ_BCDC1240D","price":880.4,"currency_code":"CAD","in_stock":true}]},{"product_id":"dc-dc-charger-12v-50a-in-vehicle-dc-dc-battery-charger","title":"REDARC BCDC1250D DC-DC Charger 12V 50A In-Vehicle DC-DC Battery Charger","description":"The REDARC BCDC1250D is a 12V, 50A In-vehicle DC to DC Battery Charger designed to keep your auxiliary battery charged when driving or with portable solar panels when parked. It uses multi-stage DC-DC charging, a system that allows optimum charging levels for your auxiliary battery. The BCDC1250D has been developed to provide a higher current output, it features an additional charging stage known as SoftStart which has been engineered so that it can handle more demanding applications. Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1250D will charge from both solar and the alternator simultaneously. And, with built-in Green Power Priority it will select solar charging first, meaning less load on the alternator. Suitable for 12 or 24-volt vehicle systems, the unit will also work with either standard or variable\/smart alternators. It is compatible with all common types of batteries used in automotive and recreational vehicles such as AGM, Gel, standard lead acid, Calcium and LiFeP04. As a guide, the BCDC1250D is used for battery bank sizes over 200AH. For smaller batteries of 75-200AH, REDARC recommends the BCDC1225D. This DC-DC battery charger with solar input has been proven to work in all types of terrains, including deep water crossings, and stands up against extreme heat (up to 176 deg F). It's fully sealed against the risk of infiltration from water and dust and will hold up to the adventure at hand. It's designed to maximize the performance and life of your auxiliary battery and is suited for battery bank sizes of 200AH and above in most applications. Made in Australia by REDARC this amazing range has undergone years of testing in some of the harshest conditions on the planet. REDARC has been in business for 40 years and all of our products are made tough enough to take anything nature can throw at them.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187324649787,"sku":"JGHJ_BCDC1250D","price":979.8,"currency_code":"CAD","in_stock":true}]},{"product_id":"bcdc-mounting-bracket-to-suit-toyota-200-series","title":"REDARC BCDCMB-001 BCDC Mounting Bracket to suit Toyota 200 series","description":"The BCDCMB-007 is a Universal Mounting Bracket allowing a REDARC?BCDC In-vehicle battery charger?to be mounted in a vehicle?s engine bay when a model-specific mounting bracket is not available. This mounting bracket is manufactured from robust 304 stainless steel and is purpose-built to fit the BCDC DC-DC charger into existing mounting points located within a vehicle's engine bay. By using this mounting bracket, you will guarantee a neat and professional installation of your REDARC dual battery charger. Another advantage of this Mounting Bracket is that it positions the BCDC Charger at the front of the vehicle where it will receive cool airflow which results in optimal performance. Included in this kit is everything needed for a hassle-free installation including comprehensive instructions, fasteners and mounting bracket. All component parts of the Universal Bracket are attached to each other during manufacture and transit, so please ensure before installing the bracket you separate the components by breaking the small connecting tags between the parts. No tools are required. Our wide selection of?DC to DC battery chargers?are designed to keep your battery charged whilst driving and will fully charge auxiliary batteries to a proven 100%. Compact in size, easy to install and fully sealed - water, dust and vibration are no match for our vehicle battery chargers. Suitable for 12 or 24-volt vehicle systems, REDARC's dual battery chargers work with either standard, voltage alternators or smart alternators.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187324715323,"sku":"JGHJ_BCDCMB-001","price":102.35,"currency_code":"CAD","in_stock":false}]},{"product_id":"battery-charger-mounting-bracket","title":"REDARC BCDCMB-007 Battery Charger Mounting Bracket","description":"The REDARC BCDCMB-001 is a Mounting Bracket for REDARC?s?BCDC In-vehicle charger range, providing simple installation of the BCDC into the engine bay of Toyota LandCruiser 200 Series (11\/2008 ? onwards). The 304 stainless steel bracket allows installation into the front of the vehicle allowing for cooler airflow, ensuring optimal performance and has been designed to fit existing mounting points in the vehicle.This bracket is designed to be used with REDARC?s range of?dc to dc chargers?and comes complete with instructions and fasteners to complete the installation process. This bracket is tailored for fi ent with the engine bay of 200 Series LandCruisers built from November 2008. Getting a dead battery when you?re off on a 4WD or caravan adventure is the worst. However, with some of the most powerful and compact DC-DC battery chargers Australia has to offer, you can have peace of mind with REDARC. No matter what kind of?battery charging system?you're after, REDARC has the solution. Our wide selection of?DC to DC battery chargers?are designed to keep your battery charged whilst driving and will fully charge auxiliary batteries to a proven 100%.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187324813627,"sku":"JGHJ_BCDCMB-007","price":102.35,"currency_code":"CAD","in_stock":true}]},{"product_id":"solar-panel-side-mount-x2","title":"REDARC SMI9002 SOLAR PANEL SIDE MOUNT (X2)","description":"The ABS plastic side mount is designed to attach single or multiple solar panels to a RV, caravan or boat without the need for drilling, maintaining seal integrity. The ABS plastic side mount is designed to attach single or multiple solar panels to a RV, caravan or boat without the need for drilling, maintaining seal integrity.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187324911931,"sku":"JGHJ_SMI9002","price":54.38,"currency_code":"CAD","in_stock":false}]},{"product_id":"trailer-brake-control-mounting-bracket","title":"REDARC EBMK-001 Trailer Brake Control Mounting Bracket","description":"The REDARC Tow-Pro Mounting Kit simplifies the installation of the Tow-Pro Elite electric trailer brake controller main unit under the dash of a vehicle. The bracket is designed to be fastened to the main unit with 2 x M4 bolts either at right angles, in-line or diagonally across the main unit. It also features an M6 slot and nut\/bolt allowing connection to the vehicle on a suitable M6 stud or M6 hole. The material of the bracket is rigid to support the main unit but can still be bent should the installation require it. REDARC also offer a range of vehicle specific wiring harnesses and Switch Insert Panels that aid the installation of the market-leading Tow-Pro Elite into vehicles.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187325010235,"sku":"JGHJ_EBMK-001","price":47.33,"currency_code":"CAD","in_stock":true}]},{"product_id":"landcruiser-sequoia-4runner-liberty-brake-controller-kit","title":"REDARC CIKTP-NA-004 Landcruiser \/ Sequoia \/ 4Runner Liberty Brake Controller Kit","description":"The REDARC Tow-Pro brake controller kit is the perfect off-the shelf bundle featuring everything you need to equip your LandCruiser, Sequoia or 4Runner with an electric brake controller, allowing you to tow trailers, motorhomes, camper trailers, horse floats and boat trailers. The REDARC LandCruiser \/ Sequoia \/ 4Runner brake controller kit has all the required parts to install the Tow-Pro Liberty. This kit includes: 1 Tow-Pro Liberty unit, 1 Toyota suitable Tow-Pro brake controller harness and 1 suitable switch insert to fit your vehicle and Tow-Pro model. This product bundle is the perfect DIY brake controller kit for anyone wanting to install the most innovative and industry recognised trailer brake controller into their LandCruiser, Sequoia or 4Runner.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187325141307,"sku":"JGHJ_CIKTP-NA-004","price":287.19,"currency_code":"CAD","in_stock":true}]},{"product_id":"tow-pro-elite-v3-brake-controller","title":"REDARC EBRH-ACCV3-NA Tow-Pro Elite V3 Brake Controller","description":"Looking for the best brake controller on the market? The REDARC Tow-Pro Elite is the only brake controller on the market with 2 types of braking modes at the turn of a dial and comes with a free switch insert panel (TPSI-001) to suit most vehicles. ?Proportional Mode' (Inertia sensing) for highway conditions and ?User Controlled Mode' for all terrain conditions. You can choose what braking type best suits the road conditions, vehicle type or driver preference, and the Tow-Pro Elite is suitable for 12 and 24-volt systems. This model features a three-axis accelerometer which can measure acceleration in any direction. The main unit can be mounted in any orientation, out of sight and still sense the brake level accurately. The SEMA Global Media Award winning Tow-Pro Elite also comes with self-levelling technology, so it can sense the rate of deceleration and features active calibration, which constantly monitors the vehicles direction of travel, with or without a trailer attached. The REDARC Tow-Pro Elite control knob is designed with low profile and shock-absorbing elastomers ensuring it can be installed in crash impact zones, and all Tow-Pro Elite purchases come with a free universal pig-tail wiring harness included as standard.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187325239611,"sku":"JGHJ_EBRH-ACCV3-NA","price":414.17,"currency_code":"CAD","in_stock":true}]},{"product_id":"remote-power-distribution-module","title":"REDARC DISP4300-RC Remote Power Distribution Module","description":"The DISP4300-RC can be used as a replacement or secondary display unit for REDARC's RedVision Total Vehicle Management System. The display uses a modern, user-friendly interface and features an easy to understand system layout. The robust display has been built and tested to withstand the toughest and most extreme environmental conditions, and allows you to control multiple on-board devices as well as have visibility of water tank levels and battery power, when paired with the REDARC Manager30 battery management system.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187325305147,"sku":"JGHJ_DISP4300-RC","price":850.58,"currency_code":"CAD","in_stock":true}]},{"product_id":"battery-fuse","title":"REDARC FK40 Battery Fuse","description":"The REDARC 40A Fuse Kit is equipped with high-quality fuses and fuse holders to fit the cable required for the specified current and make a solid connection. This ensures your installation is working safely and efficiently. Poor quality fuse holders typically don't make enough contact with the fuse, which allows dirt and other elements to get in between contact points. This generates excess heat, which can be enough to melt both the fuse and the holder.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187325468987,"sku":"JGHJ_FK40","price":131.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/5958\/2011\/files\/0008.png?v=1776814287"},{"product_id":"dual-bat-voltage-gauge","title":"REDARC G52-VVA Dual Bat. Voltage Gauge","description":"The REDARC Dual Voltage 2-1\/16 Gauge monitors battery systems mounted in 4WDs, campers, caravans, motorhomes and other similar types of vehicles. The dual gauge allows you to see the charging performance of both your main and auxiliary batteries via its LCD\/LED display. If there is a system failure, the gauge reading will drop as the battery discharges. If there is an overcharge situation, the reading will climb above the normal zone. The G52-VVA gauge also has pre-set alerts created to monitor battery health and will change the gauge's backlight to either amber or red. The G52-VVA gauge requires a 2.05 hole for mounting. REDARC offers several mounting solutions including a 2 black plastic mounting cup (GH-CUP) and a one (GH-MP1) gauge mounting panel. Features of the gauge include satin chrome bezel and 13 backlight color options to choose from. It also has multiple alert levels with amber or red backlight and an audible beep when voltage drops below 11V or exceeds 16V. If using more than one REDARC gauge, you can engage a communication link to connect gauges and change the backlight color simultaneously. Purchase the REDARC Hall Effect Current Sensor (GS-AMPS) to equip your gauge with an optional 100A rated current display, which monitors the amount of current to or from your main or auxiliary battery.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187325567291,"sku":"JGHJ_G52-VVA","price":442.38,"currency_code":"CAD","in_stock":false}]},{"product_id":"battery-to-fuse-holder-cable","title":"REDARC KIT19 Battery to Fuse Holder Cable","description":"The REDARC KIT19 is a pre-terminated battery to fuse cable capable of distributing 50 Amps when connecting REDARC's range of MIDI fuse kits to a battery positive terminal, and can be used on both start and auxiliary batteries. The short length combined with a Fuse Kit provide protection of the wiring connected and minimizes voltage drop. It is compatible with all REDARC dc to dc chargers, battery management systems, In-vehicle Power Supply and Charge Equaliser products.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187325632827,"sku":"JGHJ_KIT19","price":27.56,"currency_code":"CAD","in_stock":true}]},{"product_id":"tow-pro-liberty-remote-head-only","title":"REDARC EBRH-ACCNA-RH EBRH-ACCNA Tow-Pro Liberty Remote Head Only","description":"The Tow-Pro Liberty Electric Trailer Brake Controller Remote Head allows for convenient installation on or around the vehicle dashboard. Designed for mounting at a distance from the main unit, the remote head won't impede lower leg airbags or driver legroom and its low profile and shock-absorbing elastomers ensure it can be installed in crash impact zones. Mount the Tow-Pro Liberty Remote Head directly to the dashboard or center console, and is much smaller and easier to find space for on the dash compared to other electric trailer brake controller models. It can also be installed with a spare knock out switch, requiring only two holes to be drilled. The remote head already comes as part of the Tow-Pro Liberty Electric Trailer Brake Controller kit. Note that the REDARC Universal Switch Insert Panel (TPSI-001) can be purchased for an OEM style and appearance for installation of this remote head.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187325731131,"sku":"JGHJ_EBRH-ACCNA-RH","price":110.82,"currency_code":"CAD","in_stock":true}]},{"product_id":"hall-eff-current-sensor","title":"REDARC GS-AMPS Hall Eff. Current Sensor","description":"The REDARC hall effect current sensor is an electronic device which is designed to measure the current flowing in a circuit and output the value of that current as a voltage signal. (i.e. can monitor the amount of current to or from your main or auxiliary battery). The REDARC Hall effect current sensor is a high performance, compact cable mounted current sensor suitable for installation into rugged environments where a fully sealed product is required to assure reliability. This REDARC device is 100A rated and cannot be damaged by overload. If there is an alternator or system failure, the voltage reading will be low and drop as the battery discharges. In the case of an overcharge condition, the gauge will climb above its normal zone. There are pre-set alert levels to notify of these changes, altering the gauge backlight to programmable amber or red. The GS-AMPS is an optional sensor that is compatible with both REDARC gauges: the G52-VVA and G52-VA.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187325796667,"sku":"JGHJ_GS-AMPS","price":195.47,"currency_code":"CAD","in_stock":false}]},{"product_id":"60a-changeover-relay-kit","title":"REDARC RK1260 60A Changeover Relay Kit","description":"The RK1260 Relay Kit features a premium quality, fully sealed relay that's been tested by REDARC engineers to stand up against the harshest of environments. It allows a BCDC to be installed in a trailer that is being towed by a vehicle that is equipped with a smart alternator, thereby triggering the ignition source inside the vehicle allowing it to start and stop charging. The Relay Kit is equipped with everything you need. It includes heat sink, relay holder, butt-splice connectors, 60A\/80A sealed changeover relay with 3\/8\"contact pins, and a detailed installation instruction sheet.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187325894971,"sku":"JGHJ_RK1260","price":181.36,"currency_code":"CAD","in_stock":true}]},{"product_id":"bcdc-mounting-bracket-to-suit-toyota-landcruiser-j100-and-j105-series","title":"REDARC BCDCMB-008 BCDC Mounting Bracket to suit Toyota Landcruiser J100 And J105 Series","description":"The REDARC BCDCMB-008 is a mounting bracket that allows the installation of REDARC?s?BCDC DC-DC In-vehicle charger?range into the engine bay of both 100 and 105 Series of Toyota Landcruisers. Each mounting bracket is manufactured from durable 304 stainless steel and is tailored for the secure fi ent within the Toyota Landcruiser?s engine bay. By using a REDARC Mounting Bracket you can ensure a professional and neat install, removing the need to use customer bracket and drilling holes. By using a REDARC Mounting Bracket you also guarantee optimal performance of your BCDC DC-DC charger by ensuring it gets cool airflow. This mounting bracket kit includes everything you need to install the BCDC charger in your vehicle including a comprehensive installation template and instructions, fasteners and bracket. With more and more electrical devices being used when travelling around Australia, along with more complex vehicle electrical systems, having the right battery charging solution has never been more important. The REDARC range of?BCDC Battery Chargers?ensures optimal performance of electrical equipment. Their multi-stage charging algorithm allows them to charge any commonly used automotive auxiliary battery to 100% whilst you?re on the move.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187326026043,"sku":"JGHJ_BCDCMB-008","price":102.35,"currency_code":"CAD","in_stock":false}]},{"product_id":"bat-isolator-dual24v200a","title":"REDARC SBI224D Bat. Isolator Dual24V200A","description":"?The REDARC Smart Start SBI224D is primarily used in commercial vehicles to protect the start battery from excessive discharge and provides 24V DC, while incorporating 200A of continuous ratings. This dual sensing model allows charging of batteries in instances when the auxiliary battery may also be charged by an external source, such as an external AC battery charger or solar panels. When the auxiliary battery reaches 26.4V from its external source, the SBI224D will then charge the start battery as well. Additionally, the microprocessor-controlled battery isolator has power saving technology that prevents the solenoid from generating high voltage transients. It is used rather than a diode battery isolator due to the voltage drop associated with diode type isolation. Advanced fault detection warns the user of over-voltage, voltage drop, and excessive current draw conditions.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187326386491,"sku":"JGHJ_SBI224D","price":583.47,"currency_code":"CAD","in_stock":false}]},{"product_id":"charge-equalizer-12v25a","title":"REDARC CE25 Charge Equalizer 12V25A","description":"The REDARC 25A Charge Equalizer (CE25S2) is designed to manage a high current, 12 volt supply in a 24-volt vehicle. It allows 12 volts to be tapped from the center of a series-connected, two battery, 24 volt DC electrical system while still ensuring an equal charge across the two batteries. REDARC Charge Equalizers draw their power from a battery, rather than from a current limited device. This allows for a much larger peak current draw. Because of their high peak current capability and fast transient response, REDARC Charge Equalizers are ideally suited to loads that require a safe, clean and stable 12 volt supply. In addition, the CE25S2 features input isolation which removes the need for an input relay or isolator, making it incredibly easy to install. REDARC Charge Equalizers have proven their reliability in commercial applications under the harshest conditions.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187326550331,"sku":"JGHJ_CE25","price":759.84,"currency_code":"CAD","in_stock":false}]},{"product_id":"dc-power-supply-12v40a","title":"REDARC DPS1240 DC Power Supply 12V40A","description":"The REDARC DPS1240 is a 12V, 40A DC Power Supply that provides regulated power for sensitive load requirements, including lamps, radios, communications equipment, pumps, TVs, and more from a 12V automotive power system. The 40A DC Power Supply provides a wide input voltage range (9-32V) and optional voltage output for higher efficiency and improved functionality. Without a fan, the noise level is reduced and enables the unit to power hi-tech radio systems without interference. Encapsulated by REDARC's silicone elastomer, the 40A DC Power Supply can be mounted on the outside of the vehicle and used in marine situations. There is also a built-in protection against surges and spikes. Plus, the highly efficient design allows for easy installation.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187326615867,"sku":"JGHJ_DPS1240","price":972.7,"currency_code":"CAD","in_stock":false}]},{"product_id":"from-a-24v-automotive-power-system","title":"REDARC DPS2420 from a 24V automotive power system.","description":"The REDARC DPS2420 is a 24V 20 amp DC Power Supply that provides greater efficiency with regulated power for all sensitive load requirements, such as lamps, TVs, radios, fridges, and pumps with voltage output from a 24V automotive power system. Due to the reduced noise from the fan free power supply, there is no interference to power hi-tech radio systems. Additionally, the DC Power Supply has built-in protection against spikes and surges and is fully encapsulated for use in marine applications, as needed. For certain situations, the DC Power Supply is a suitable option for those who want to install an auxiliary battery.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187326714171,"sku":"JGHJ_DPS2420","price":972.7,"currency_code":"CAD","in_stock":false}]},{"product_id":"2-black-metal-gauge-cup","title":"REDARC GH-CUP 2\" Black Metal Gauge Cup","description":"The REDARC Metal Gauge Mounting Cup complements the REDARC 2-1\/16 \" (52mm) voltage gauge. The Monitoring Cup is designed to be flexible when mounting a gauge in your vehicle. And it's suitable for all driving conditions, driver preference, and applications. With an improved appearance and easy-to-install instructions, it can be mounted using either durable, double sided tape or screws. When mounting options are limited but gauge monitoring is critical, it's the perfect vehicle accessory. The REDARC Metal Gauge Mounting Cup comes with a two-year product warranty.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187326779707,"sku":"JGHJ_GH-CUP","price":89.65,"currency_code":"CAD","in_stock":false}]},{"product_id":"bat-isolator-kit-12v100a","title":"REDARC SBI12KIT Bat. Isolator Kit 12V100A","description":"The Smart Start Dual Battery Isolator and Wiring Kit (SBI12KIT) is equipped with everything needed to install your Smart Start Dual Battery Isolator including the Smart Start itself. The easy-to-install kit is suited for the everyday DIYer since the SBI12KIT doesn't require any crimping or soldering. High-quality MTA 60 amp fuses and fuse holders with the corresponding ring terminals are already attached to the wires. The SBI12KIT prevents your secondary battery from draining your main battery. It works for harsh automotive or marine environments. And, it significantly extends your battery life, proving to be cost-effective and efficient.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187326910779,"sku":"JGHJ_SBI12KIT","price":456.49,"currency_code":"CAD","in_stock":false}]},{"product_id":"bcdc-25amp-rear-install-wiring-kit","title":"REDARC BCDCWK-003 BCDC 25amp Rear Install Wiring Kit","description":"Suitable for BCDC1220 and BCDC1225D, the BCDCWK-003 BCDC Wiring Kit has been designed to facilitate easy installation of a REDARC BCDC DC to DC Battery charger when the start battery and auxiliary battery are at opposite ends of the vehicle (more than 28?). Typically, these installations see the auxiliary battery located in the tray of the pickup truck or at the rear of a wagon. This kit contains all the cables, fuses, fuse holders and connectors required to install the BCDC between the batteries. The cables are even pre-crimped on one end, and through use of the supplied terminal block, the other end of the cables can be trimmed to length to suit the specific installation. The Auxiliary Battery ground cable and solar to Anderson cable are sold separately.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187327009083,"sku":"JGHJ_BCDCWK-003","price":470.6,"currency_code":"CAD","in_stock":false}]},{"product_id":"tow-pro-30a-breaker-kit","title":"REDARC CBK30-EB Tow-Pro 30A Breaker Kit","description":"The REDARC 30A Circuit Breaker Kit features wiring and connections suited for a three-axle electric trailer brake controller setup. The kit contains a detailed wiring diagram for installation. It also includes a protective boot to cover the circuit breaker and protect against any accidental terminal shortage. With the CBK30-EB, the majority of work is already done for you. The battery connection wire has a robust protective conduit, heat shrink, and crimp already attached. Plus, the brake controller connection is pre-crimped with heat shrink. Both wires just need to be affixed to the circuit breaker with the nuts provided in the kit. To connect to the brake controller, REDARC recommends soldering the joint after crimping to ensure a positive electrical connection.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187327107387,"sku":"JGHJ_CBK30-EB","price":110.82,"currency_code":"CAD","in_stock":false}]},{"product_id":"battery-isolator-12v200a","title":"REDARC SBI212 Battery Isolator 12V200A","description":"The REDARC Smart Start SBI212 is a battery isolator used as a solenoid priority system to protect the start battery from excessive discharge while the auxiliary battery is supplying non-essential loads. It provides 12-volt DC with the incorporation of 200A of continuous ratings. The SBI212 is designed for extremely heavy-duty operations. It's primarily used in commercial vehicle dual battery systems. It incorporates electronic components to prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. Its low standby current draw and sophisticated fault detection and LED indication of operation warns the user of faults including over-voltage, voltage drop, and excessive current draw conditions. The Smart Start SBI battery isolator is a safe way to top-up your secondary battery in your dual battery system with its power saving technology for the ultimate performance.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187327172923,"sku":"JGHJ_SBI212","price":470.6,"currency_code":"CAD","in_stock":true}]},{"product_id":"bat-isolator-dual12v200a","title":"REDARC SBI212D Bat. Isolator Dual12V200A","description":"The REDARC Smart Start SBI212D is a microprocessor-controlled dual battery isolator used in a dual battery system. It is designed to be used as a solenoid priority system to protect the start battery from excessive discharge while allowing the auxiliary battery to supply non-essential loads. And its compact size makes it easy to install. The SBI212D provides 12 volt DC incorporating 200A of continuous ratings and is designed for extremely heavy-duty operations. This dual sensing model isolates the start and auxiliary battery in a system where the auxiliary battery may be charged by solar panels, an external AC battery charger, or another external source. The SBI212D also allows the start battery to be charged by the external source once the auxiliary battery reaches 13.2V. It features fault detection and LED indication of operation to warn the user of instances of voltage drop, over-voltage, or excessive current draw conditions. Its components prevent the solenoid from generating high voltage transients, making it better than a diode battery isolator. The SBI range facilitates additional charge via your vehicle's alternator. Equipped with full surge protection, the power saving technology of the SBI212D is used primarily in 4WD and commercial vehicles and provides a safe way to charge an auxiliary battery.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187327303995,"sku":"JGHJ_SBI212D","price":548.2,"currency_code":"CAD","in_stock":true}]},{"product_id":"50w-solar-panel","title":"REDARC SMSP1050 50W SOLAR PANEL","description":"The REDARC 50W Monocrystalline Solar Panel is a standard monocrystalline flat panel designed to capture solar energy to keep batteries charged throughout the day. Looking for the best 50w solar panel for camping? The REDARC monocrystalline flat panels are highly efficient with a robust design. A tempered glass coating and a sturdy aluminum frame ensure that our panels will withstand harsh road conditions and extreme weather conditions. These are designed for a fixed installation, typically on the roof area of caravans, RV?s, motorhomes, as well as some camper trailer and 4x4 vehicle applications. Featuring an anodized aluminum frame and tempered glass coating they are well suited for outdoor use and employ MC4 connectors for easy installation. Fixed Solar Panels feature a weight improvement and smaller footprint design for their power output, effectively contributing to a lighter, smaller design with greater cell efficiency. The Fixed Solar Panels will integrate into the REDARC product line and will be supported by existing Solar Regulator and Solar Accessory products. Each panel is tested at time of manufacture to conform to CE standards, so you can be sure that the panel output is exactly as described in its specification.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187327402299,"sku":"JGHJ_SMSP1050","price":306.93,"currency_code":"CAD","in_stock":true}]},{"product_id":"tundra-tacoma-elite-brake-controller-kit","title":"REDARC CIKTP-NA-001 Tundra \/ Tacoma Elite Brake Controller Kit","description":"The REDARC Tow-Pro brake controller kit is the perfect off-the shelf bundle featuring everything you need to equip your Tundra \/ Tacoma with an electric brake controller, allowing you to tow trailers, motorhomes, camper trailers, horse floats and boat trailers. The REDARC Tundra \/ Tacoma brake controller kit has all the required parts to install the Tow-Pro Elite. This kit includes: 1 Tow-Pro Elite unit, 1 Toyota suitable Tow-Pro brake controller harness and 1 suitable switch insert to fit your vehicle and Tow-Pro model. This product bundle is the perfect DIY brake controller kit for anyone wanting to install the most innovative and industry recognised trailer brake controller into their Tundra \/ Tacoma.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187327467835,"sku":"JGHJ_CIKTP-NA-001","price":414.17,"currency_code":"CAD","in_stock":true}]},{"product_id":"landcruiser-sequoia-4runner-elite-brake-controller-kit","title":"REDARC CIKTP-NA-002 Landcruiser \/ Sequoia \/ 4Runner Elite Brake Controller Kit","description":"The REDARC Tow-Pro brake controller kit is the perfect off-the shelf bundle featuring everything you need to equip your LandCruiser, Sequoia or 4Runner with an electric brake controller, allowing you to tow trailers, motorhomes, camper trailers, horse floats and boat trailers. The REDARC LandCruiser \/ Sequoia \/ 4Runner brake controller kit has all the required parts to install the Tow-Pro Elite. This kit includes: 1 Tow-Pro Elite unit, 1 Toyota suitable Tow-Pro brake controller harness and 1 suitable switch insert to fit your vehicle and Tow-Pro model. This product bundle is the perfect DIY brake controller kit for anyone wanting to install the most innovative and industry recognised trailer brake controller into their LandCruiser, Sequoia or 4Runner.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187327533371,"sku":"JGHJ_CIKTP-NA-002","price":367.97,"currency_code":"CAD","in_stock":true}]},{"product_id":"battery-fuse-1","title":"REDARC FK60 Battery Fuse","description":"The REDARC 60A Fuse Kit is equipped with top quality fuses and fuse holders to fit the cable necessary for the specified current and make a solid connection. This provides a safe and efficient installation. A common problem customers often face is the use of poor quality fuse holders. When a fuse holder doesn't make the right contact with a fuse, there is room for dirt and dust to affect the contact points. As a result, excess heat is generated which can melt both the fuse and the holder.Prevent fuse problems with a REDARC Fuse Kit. The kit is offered in a 40A version as well and both are designed for BCDC installations. The REDARC 100A version is designed for SBI installations. Each fuse kit comes with (2) fuse holders, (4) 40A fuses, cable crimps, and a detailed instruction sheet.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187327729979,"sku":"JGHJ_FK60","price":131.98,"currency_code":"CAD","in_stock":true}]},{"product_id":"bcdc-50amp-across-engine-bay-wiring-kit","title":"REDARC BCDCWK-005 BCDC 50amp Across Engine Bay Wiring Kit","description":"Suitable for BCDC1240D and BCDC1250D, the BCDCWK-005 BCDC Wiring Kit has been designed to facilitate easy installation of a REDARC BCDC DC to DC Battery charger when the start battery and auxiliary battery are at opposite ends of the engine bay (more than 2?, but less than 11?). This kit contains all the cables, fuses, fuse holders and connectors required to install the BCDC between the batteries. The cables are even pre-crimped on one end, and through use of the supplied terminal block, the other end of the cables can be trimmed to length to suit the specific installation. This kit contains cables with a wider diameter, and higher rated fuses suitable for high current.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187328057659,"sku":"JGHJ_BCDCWK-005","price":505.87,"currency_code":"CAD","in_stock":false}]},{"product_id":"tow-pro-elite-v3-remote-head-only","title":"REDARC EBRH-ACCV3-RH Tow-Pro Elite V3 Remote Head Only","description":"The Tow-Pro Elite Electric Trailer Brake Controller Remote Head allows for convenient installation on or around the vehicle dashboard. Designed for mounting at a distance from the main unit, the remote head won't impede lower leg airbags or driver legroom and its low profile and shock-absorbing elastomers ensure it can be installed in crash impact zones.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187328516411,"sku":"JGHJ_EBRH-ACCV3-RH","price":110.82,"currency_code":"CAD","in_stock":true}]},{"product_id":"battery-fuse-2","title":"REDARC FK30 Battery Fuse","description":"The REDARC 30A Fuse Kit is equipped with high-quality fuses and a fuse holder to fit the cable required for the specified current and make a solid connection. This ensures your installation is working safely and efficiently. Poor quality fuse holders typically don't make enough contact with the fuse, which allows dirt and other elements to get in between contact points. This generates excess heat, which can be enough to melt both the fuse and the holder. Avoid fuse problems with a REDARC Fuse Kit. The kits are offered in 23A, 30A, 40A and 60A versions and are designed for dc to dc charger installations. The FK30 is also perfectly suited for use with the BCDC1212 trailer battery charger output.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187328942395,"sku":"JGHJ_FK30","price":96.71,"currency_code":"CAD","in_stock":false}]},{"product_id":"charge-equalizer-12v40a","title":"REDARC CE40S2 Charge Equalizer 12V40A","description":"The REDARC 40A Charge Equalizer (CE40S2) is designed to manage a high current, 12 volt supply in a 24-volt vehicle. It allows 12 volts to be tapped from the center of a series-connected, two battery, 24 volt DC electrical system while still ensuring an equal charge across the two batteries. REDARC Charge Equalizers draw their power from a battery, rather than from a current limited device. This allows for a much larger peak current draw. Because of their high peak current capability and fast transient response, REDARC Charge Equalizers are ideally suited to loads that require a safe, clean and stable 12 volt supply. In addition, the CE40S2 features input isolation which removes the need for an input relay or isolator, making it incredibly easy to install. REDARC Charge Equalizers have proven their reliability in commercial applications under the harshest conditions.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187329401147,"sku":"JGHJ_CE40S2","price":880.4,"currency_code":"CAD","in_stock":false}]},{"product_id":"dc-power-supply-24v10a","title":"REDARC DPS2410 DC Power Supply 24V10A","description":"The REDARC 24V 10A DC Power Supply (DPS2410) provides regulated power for a wide input voltage range (9 to 32 volts) for a number of load requirements, such as radios, lamps, computers, refrigerators, pumps, and TVs, all from a 24V automotive power system. The power supply protects against surges, spikes, reverse polarity and incorrect connections, while providing improved efficiency and functionality. It is fully encapsulated by REDARC's silicone elastomer and can be mounted externally on the vehicle and used in marine applications, if necessary. Plus, the fan free model means less noise to prevent interference when powering hi-tech radio systems.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187329892667,"sku":"JGHJ_DPS2410","price":759.84,"currency_code":"CAD","in_stock":false}]},{"product_id":"battery-fuse-3","title":"REDARC FK23 Battery Fuse","description":"The REDARC 23A Fuse Kit is equipped with high-quality fuses and a fuse holder to fit the cable required for the specified current and make a solid connection. This ensures your installation is working safely and efficiently. Poor quality fuse holders typically don't make enough contact with the fuse, which allows dirt and other elements to get in between contact points. This generates excess heat, which can be enough to melt both the fuse and the holder. Avoid fuse problems with a REDARC Fuse Kit. The kits are offered in 23A, 30A, 40A and 60A versions and are designed for dc to dc charger installations. The FK23 is also perfectly suited for use with the BCDC1212 trailer battery charger input.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187330351419,"sku":"JGHJ_FK23","price":96.71,"currency_code":"CAD","in_stock":false}]},{"product_id":"bcdc-50amp-rear-install-wiring-kit","title":"REDARC BCDCWK-006 BCDC 50amp Rear Install Wiring Kit","description":"Suitable for BCDC1240D and BCDC1250D the BCDCWK-006 BCDC Wiring Kit has been designed to facilitate easy installation of a REDARC BCDC DC to DC Battery charger when the start battery and auxiliary battery are at opposite ends of the vehicle (more than 28?). Typically, these installations see the auxiliary battery located in the tray of the pickup truck or at the rear of a wagon. This kit contains all the cables, fuses, fuse holders and connectors required to install the BCDC between the batteries. The cables are even pre-crimped on one end, and through use of the supplied terminal block, the other end of the cables can be trimmed to length to suit the specific installation. This kit contains cables with a wider diameter, and higher rated fuses suitable for high current.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187330777403,"sku":"JGHJ_BCDCWK-006","price":541.14,"currency_code":"CAD","in_stock":false}]},{"product_id":"tundra-tacoma-liberty-brake-controller-kit","title":"REDARC CIKTP-NA-003 Tundra \/ Tacoma Liberty Brake Controller Kit","description":"The REDARC Tow-Pro brake controller kit is the perfect off-the shelf bundle featuring everything you need to equip your Tundra \/ Tacoma with an electric brake controller, allowing you to tow trailers, motorhomes, camper trailers, horse floats and boat trailers. The REDARC Tundra \/ Tacoma brake controller kit has all the required parts to install the Tow-Pro Liberty. This kit includes: 1 Tow-Pro Liberty unit, 1 Toyota suitable Tow-Pro brake controller harness and 1 suitable switch insert to fit your vehicle and Tow-Pro model. This product bundle is the perfect DIY brake controller kit for anyone wanting to install the most innovative and industry recognised trailer brake controller into their Tundra \/ Tacoma.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187331268923,"sku":"JGHJ_CIKTP-NA-003","price":287.19,"currency_code":"CAD","in_stock":true}]},{"product_id":"100a-fuse-kit","title":"REDARC FK100 100A Fuse Kit","description":"The REDARC 100A Fuse Kit is designed for Smart Battery Isolator installations. It is equipped with the best quality fuses and fuse holders to fit the cable needed for a specified current to make a solid connection. This allows the user peace of mind for a safe and efficient installation. Poor quality fuse holders are a common problem customers face since it can be hard to make the right contact. When dirt or dust gets in between the contact points it can lead to excessive heat, which can melt the fuse and the holder. You don't have to worry about these problems with a REDARC Fuse Kit. Each fuse kit comes with (2) fuse holders, (4) 40A fuses, cable crimps, and a detailed instruction sheet. The kit is also offered in 40A and 60A versions and are designed for BCDC installations.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187331727675,"sku":"JGHJ_FK100","price":329.51,"currency_code":"CAD","in_stock":false}]},{"product_id":"gauge-enhanced-light-controller","title":"REDARC GA-ELC Gauge Enhanced Light Controller","description":"The REDARC Enhanced Lighting Controller enhances the brightness level of your REDARC gauge. When you don't have a dimming circuit to connect your gauge or it doesn't dim to your preference, the lighting controller allows you to choose both brightness and color. The GA-ELC is 24-volt capable and only one is necessary for a set of gauges. Once you've programmed your chosen dimness and color, the gauge will change based on nighttime and daytime settings. REDARC strongly recommends that an Enhanced Lighting Controller (GA-ELC) be purchased with all gauges. This ensures that the gauge is not too bright when driving at night, by dimming the gauge and\/or changing the backlight color.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187332186427,"sku":"JGHJ_GA-ELC","price":124.92,"currency_code":"CAD","in_stock":false}]},{"product_id":"trailer-brake-control-mounting-accessory","title":"REDARC EPDK-001 Trailer Brake Control Mounting Accessory","description":"REDARC has released an Encapsulated Protection Device (EPDK-001). It is rated at 7 Amps for both 12 and 24V applications. It is totally encapsulated with sealed connections. The EPDK-001 has been designed to fit in the Trailer Stop Lamp feed to support the installation of Tow-Pro Electric Brake Controllers on vehicles where ?back-feed' of 12V (during Tow-Pro Manual Override) may interfere with the vehicle systems. When installed correctly, the EPDK-001 ensures correct Trailer braking and Stop Lamp operation when the vehicle brakes or the Tow-Pro Manual Override is used. It supports 12V and 24V applications capable of supporting a maximum continuous current of 7 Amps at a maximum ambient temperature of 850 deg C.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187332874555,"sku":"JGHJ_EPDK-001","price":89.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/5958\/2011\/files\/0033.png?v=1776814556"},{"product_id":"tow-pro-elite-v3-13ft-remote-head-wiring-kit","title":"REDARC RHWK-004 Tow-Pro Elite V3 13ft Remote Head Wiring Kit","description":"The REDARC Tow-Pro Elite Remote Head Wiring Kit is a 13-feet cable that interconnects the Remote Head to the Main Unit. This cable has automotive style connectors, increasing the durability of the Tow-Pro Elite. REDARC offer 2 Remote Head Wiring Kits between 3ft and 13ft. REDARC also offer a range of Wiring Kits and Switch Inserts which help aid the marketing-leading Tow-Pro Elite into vehicles.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187333333307,"sku":"JGHJ_RHWK-004","price":47.33,"currency_code":"CAD","in_stock":false}]},{"product_id":"bat-isolator-dual12v100a","title":"REDARC SBI12D Bat. Isolator Dual12V100A","description":"The REDARC Smart Start SBI12D is a microprocessor-controlled dual battery isolator used in a dual battery system. It's manufactured for use as a solenoid priority system to protect the start battery from excessive discharge while allowing the auxiliary battery to supply non-essential loads. The SBI12D provides 12 volt DC incorporating 100A of continuous ratings and is designed for heavy-duty operations. The dual sensing model is compact and easy to install. It isolates the start and auxiliary battery in a system where the auxiliary battery may be charged by an external source. The SBI12D also allows the start battery to be charged by the external source after the auxiliary battery reaches 13.2V. The power saving technology includes fault detection and LED indication of operation to warn users of voltage drops, over-voltage, or excessive current draw conditions. The SBI12D has components that prevent the solenoid from generating high voltage transients. It's better than a diode battery isolator based on the the voltage drop associated with a diode type isolation. The SBI12D has full surge protection and is used primarily in 4WD and commercial vehicles. Choose the SBI12D for a safe way to charge an auxiliary battery. The SBI range manages battery charge for your secondary battery banks while on the move.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187333398843,"sku":"JGHJ_SBI12D","price":280.13,"currency_code":"CAD","in_stock":true}]},{"product_id":"dc-power-supply-12v25a","title":"REDARC DPS1225 DC Power Supply 12V25A","description":"The REDARC DPS1225 is a 12V, 25A DC Power Supply that provides regulated power for load requirements such as lamps, radios, computers, refrigerators, TVs, and more from a 12V automotive power system. The DC Power supply has a wide input voltage range (9-32V) and generates little electric noise, which enables the unit to power hi-tech radio systems without interference. It is fully encapsulated in REDARC's silicone elastomer and can be externally mounted on the vehicle and used in marine applications. Users benefit from built-in surge protection and reverse polarity. Additional benefits include more efficiency with regulated output power and improved functionality.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187333595451,"sku":"JGHJ_DPS1225","price":759.84,"currency_code":"CAD","in_stock":false}]},{"product_id":"mounting-panel-1-gauge","title":"REDARC GH-MP1 Mounting Panel- 1 Gauge","description":"The REDARC GH-MP1 Mounting Panel is made of black aluminum suited to fit one REDARC 2.05 (52mm) gauge. Mounting screws included.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187333660987,"sku":"JGHJ_GH-MP1","price":61.44,"currency_code":"CAD","in_stock":false}]},{"product_id":"tow-pro-elite-v3-3ft-remote-head-wiring-kit","title":"REDARC RHWK-001 Tow-Pro Elite V3 3ft Remote Head Wiring Kit","description":"The REDARC Tow-Pro Elite Remote Head Wiring Kit is a 3-feet cable that interconnects the Remote Head to the Main Unit. This cable has automotive style connectors, increasing the durability of the Tow-Pro Elite. REDARC offer 2 Remote Head Wiring Kits between 3ft and 13ft. REDARC also offer a range of Wiring Kits and Switch Inserts which help aid the marketing-leading Tow-Pro Elite into vehicles.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187333726523,"sku":"JGHJ_RHWK-001","price":27.56,"currency_code":"CAD","in_stock":false}]},{"product_id":"battery-isolator-12v100a","title":"REDARC SBI12 Battery Isolator 12V100A","description":"The REDARC Smart Start SBI12 is a microprocessor-controlled battery isolator which protects the start battery from excessive discharge, while allowing the auxiliary battery to supply charge to non-essential loads. It is used as a solenoid priority system in dual battery systems and provides 12V DC incorporating 100A of continuous ratings. The SBI range manages battery charge for your secondary battery while on the move. The battery isolator is mostly used in 4WD and commercial vehicles. It incorporates electronic components that prevents the solenoid from generating high voltage transients. Due to the voltage drop associated with diode type isolation, it's better than a diode battery isolator. A low standby current draw and fault detection and LED indication of operation warns users of faults such as voltage drops, over-voltage, and excessive current draw conditions. Safely maintain the charge your dual battery system with the Smart Start SBI12 battery isolator.","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187333923131,"sku":"JGHJ_SBI12","price":237.81,"currency_code":"CAD","in_stock":true}]},{"product_id":"20-amp-solar-regulator-kit","title":"REDARC SRPA20-VP 20 AMP SOLAR REGULATOR KIT","description":"The REDARC 20 Amp Solar Regulator and Cable Value Pack is used to connect to the REDARC solar blanket range. The REDARC 20 Amp Solar Regulator and Cable Value Pack provides everything that is required to connect and use a?REDARC solar blanket range. Includes 20 Amp Solar Regulator, 16FT Anderson? to Anderson? cable, 16FT Anderson to Battery clip cable When purchased with a REDARC solar blanket, the value pack offers a complete solar kit. REDARC?S 20A Solar Regulator comes with the Anderson? SB?50 connectors and is ideal for use with the 150W and 190W SunPower? cell blanket. REDARC?s Solar Regulator acts as the go between to transfer power generated from the panels to the battery.? The 16FT Anderson? to Anderson? Cable provides the option to increase the distance from the solar blanket to the vehicle, allowing you?to set up camp in a shady area but still get the most out of the sun. The 16FT Anderson? to Battery Clip Cable allows a fast and high-quality portable connection from the solar regulator direct to the battery terminals. The use?of genuine industry standard Anderson? SB?50 connectors ensure simple and fast connection, with no screw terminals and no risk of poor connections from frayed wires or loose terminals ? just plug and play!","brand":"REDARC","offers":[{"title":"Default Title","offer_id":51187336053051,"sku":"JGHJ_SRPA20-VP","price":604.63,"currency_code":"CAD","in_stock":false}]}],"url":"https:\/\/performancepartscanada.ca\/collections\/redarc.oembed?page=2","provider":"Performance Parts Canada","version":"1.0","type":"link"}