MPN: 2970G
Mr Gasket 2970G Mr. Gasket Fuel Line Fitting - 3/8 Inch NPT to 3/8 Inch Hose Barb - 90° - Chrome
$18.79
BCZG_2970G
Air and Fuel Delivery
Fuel Pump Fitting
Hardware, Fasteners and Fittings
Mr. Gasket adapter fittings are engineered for competition use with thin wall designs that, combined with easy gradual curves, allow maximum fuel flow and...
MPN: 1514
Mr Gasket 1514 Mr. Gasket Fuel Pump Mounting Plate - Chrome
$32.29
BCZG_1514
Air and Fuel Delivery
Chevrolet Camaro
Fuel Pump Mounting Kit
Service Kits
Ideal for mounting a stock original equipment pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete...
MPN: 105P
Mr Gasket 105P Mr. Gasket Electric Fuel Pump with Regulator - 105 GPH
$179.46
BCZG_105P
Air and Fuel Delivery
Electric Fuel Pump
Fuel Pumps and Related Components
This high performance electric fuel pump has a free flow rate of 105 GPH (gallons per hour) with a maximum pressure of 14 psi...
MPN: 12E
Mr Gasket 12E 4 - 7 PSI - 35 GPH - Ethanol and Methanol - For Carburetor
$99.07
BCZG_12E
Air and Fuel Delivery
Electric Fuel Pump
Fuel Pumps and Related Components
Gravity fed type pump with simple two-wire design. Works on 12 volt negative ground systems only. Includes fittings and mounting hardware along with a...
MPN: 3811G
Mr Gasket 3811G Quick disconnect ball joints for carburetor linkage.
$58.10
BCZG_3811G
Air and Fuel Delivery
Carburetion
Carburetor Accelerator Linkage Kit
Quick disconnect ball joints for carburetor linkage. Two per set. Use with Linkage Rod # 3815
MPN: 3810G
Mr Gasket 3810G Standard ball joints for carburetor linkage.
$57.56
BCZG_3810G
Air and Fuel Delivery
Carburetion
Carburetor Accelerator Linkage Kit
Standard ball joints for carburetor linkage. Two per set. Use with Linkage Rod # 3815
MPN: 6039
Mr Gasket 6039 Mr. Gasket Throttle And Transmission Kickdown Cable Bracket - Chrome
$35.54
BCZG_6039
Air and Fuel Delivery
Brackets, Flanges and Hangers
Carburetor Throttle Cable Bracket
Mr. Gasket Universal Chrome Throttle And Transmission Kick down Cable Bracket for Carbureted Engines. This precision formed, chrome plated throttle cable bracket will make...
MPN: 6038
Mr Gasket 6038 This throttle cable bracket is made from chrome plated steel.
$28.29
BCZG_6038
Air and Fuel Delivery
Brackets, Flanges and Hangers
Carburetor Throttle Cable Bracket
This throttle cable bracket is made from chrome plated steel.
MPN: 6092MRG
Mr Gasket 6092MRG Mr. Gasket Stainless Throttle Cable Bracket
$37.12
BCZG_6092MRG
Air and Fuel Delivery
Brackets, Flanges and Hangers
Carburetor Throttle Cable Bracket
Stainless steel. Includes two springs and bracket.
MPN: 1558
Mr Gasket 1558 Fits Holley 4160 style Carburetors with 8-21/32 Inch Centers
$160.90
BCZG_1558
Air and Fuel Delivery
Fuel Injection System and Related Components
Fuel Line
Fits Holley 4160 style carburetors with 8-21/32 inch center-to-center fuel inlet spacing. These fuel lines are not only great looking but are very functional....
MPN: 1559
Mr Gasket 1559 Fits Holley 4150 style Carburetors with 9-5/16 Inch Centers
$150.37
BCZG_1559
Air and Fuel Delivery
Fuel Injection System and Related Components
Fuel Line
Fits Holley 4150 style carburetors with 9-5/16 inch center-to-center fuel inlet spacing. These fuel lines are not only great looking but are very functional....
MPN: 1576
Mr Gasket 1576 Fits Race, Speed and Road Demon carburetors.
$145.75
BCZG_1576
Air and Fuel Delivery
Fuel Injection System and Related Components
Fuel Line
Mr. Gasket Chrome Fuel Line with Gauge fits Race, Speed & Road Demon Carburetors. Includes 0-15 PSI (pounds per inch) fuel pressure gauge. Engineered...
MPN: 29883
Mr Gasket 29883 Fits Edelbrock and Carter Carburetors.
$24.46
BCZG_29883
Air and Fuel Delivery
Fuel Injection System and Related Components
Fuel Line
Chrome plated steel. 3/8 inch NPT inlet. 1/8 inch NPT Gauge Port.
MPN: 1350
Mr Gasket 1350 For Carbureted fuel systems only.
$414.84
BCZG_1350
Air and Fuel Delivery
Fuel Cooler
Fuel Injection System and Related Components
Make more power by keeping your gas cooler with the Mr. Gasket Cool Can. The Cool Can installs easily. Kit includes 5 inch diameter...
MPN: 1556G
Mr Gasket 1556G Mr. Gasket Adjustable Fuel Line with Red and Blue Hose Ends
$87.52
BCZG_1556G
Air and Fuel Delivery
Fuel Injection System and Related Components
Fuel Line
1/8 inch NPT port and plug for fuel gauge. Fits Holley 4150/4160 series carburetors. 3/8 inch hose barb.
MPN: 1551
Mr Gasket 1551 Fits Holley 4160 Style Carburetors with 8-21/32 Inch centers
$64.04
BCZG_1551
Air and Fuel Delivery
Fuel Injection System and Related Components
Fuel Line
Constructed with copper tubing, brass fittings and silver brazed connections. The hex design provides wrenching area for easier installation of fittings. This fuel line...
MPN: 1552
Mr Gasket 1552 Fits Holley 4150 style Carburetors with 9-5/16 Inch centers.
$64.50
BCZG_1552
Air and Fuel Delivery
Fuel Injection System and Related Components
Fuel Line
Dual-inlet Holley 4150 4-barrel carburetors with 3/8 inch hose & 9-5/16 inch spacing. This fuel line kit has a hex design with chrome plated...
MPN: 1515
Mr Gasket 1515 Fits Carbureted Small Block Chevrolet 265-400
$25.85
BCZG_1515
Air and Fuel Delivery
Chevrolet Camaro
Fuel Pump Block-Off Plate
Fuel Pumps and Related Components
This is what you need when changing your manual fuel pump to electric. It blocks the hole that remains when you remove the mechanical...
MPN: 1517
Mr Gasket 1517 Mr. Gasket Fuel Pump Block Off Plate - Chrome
$32.36
BCZG_1517
Air and Fuel Delivery
Ford Mustang
Fuel Pump Block-Off Plate
Fuel Pumps and Related Components
Block-off plates are precision cut to cover stock fuel pump openings. Gasket included.
MPN: 1516
Mr Gasket 1516 Mr. Gasket Fuel Pump Block Off Plate - Chrome
$25.85
BCZG_1516
Air and Fuel Delivery
Chevrolet Camaro
Fuel Pump Block-Off Plate
Fuel Pumps and Related Components
Precision cut to cover stock fuel pump opening when converting to an electric fuel pump. Gasket included.
MPN: 40205G
Mr Gasket 40205G Electric Fuel Pump Harness & Relay Wiring Kit. 30 Amp Relay and Circuit Breaker.
$69.41
BCZG_40205G
Air and Fuel Delivery
Fuel Pump Wiring Harness
Wire, Cable and Related Components
Mr. Gasket wiring harness & relay kits protect your electrical system and provide reliable and consistent power for your high performance electric fuel pump....
MPN: 1526
Mr Gasket 1526 Mr. Gasket Braided Steel Fuel Line Kit - 3/8 Inch x 3 Foot
$45.76
BCZG_1526
Air and Fuel Delivery
Fuel Injection System and Related Components
Fuel Line
This fuel line will fit on any standard 3/8 inch hose barb in any carbureted fuel system. Sized at 3/8 inch i.d. (inner diameter)...
MPN: 3406
Mr Gasket 3406 Mr. Gasket Phenolic Carburetor Spacer Kit - 1 Inch - 4 Hole Center
$61.51
BCZG_3406
Air and Fuel Delivery
Carburetor Spacer
Hardware, Fasteners and Fittings
This 1 inch tall phenolic thermoset plastic spacer insulates your carburetor against manifold heat keeping it cooler and helps prevent fuel percolation (also known...
MPN: 3405
Mr Gasket 3405 Mr. Gasket Phenolic Carburetor Spacer - 1 Inch - Open Center
$81.99
BCZG_3405
Air and Fuel Delivery
Carburetor Spacer
Hardware, Fasteners and Fittings
This 1 inch tall phenolic thermoset plastic spacer insulates your carburetor against manifold heat keeping it cooler and helps prevent fuel percolation (also known...
MPN: 9710
Mr Gasket 9710 Mr. Gasket Adjustable Fuel Pressure Regulator 1-6 Psi
$88.00
BCZG_9710
Air and Fuel Delivery
Carburetion
Fuel Pressure Regulator
Adjustable from 1-6 PSI (pounds per square inch) it includes brass fittings for use with 1/4 inch, 5/16 inch, or 3/8 inch fuel hose....
MPN: 2015
Mr Gasket 2015 Fits high performance return-style carbureted applications
$100.67
BCZG_2015
Air and Fuel Delivery
Carburetion
Fuel Pressure Regulator
The Mr. Gasket Fuel Pressure Regulator #2015 is a return-style fuel pressure regulator. Operating fuel pressure range is 4.5-9 PSI (pounds per square inch).
MPN: 6150MRG
Mr Gasket 6150MRG Mr. Gasket Tee Style Fuel Block with 2 Outlets
$75.29
BCZG_6150MRG
Air and Fuel Delivery
Fuel Injection System and Related Components
Fuel Line Junction Block
Dual Outlet. The classic inchT inch design for today's needs. These are precision die-cast, chrome plated blocks, ideal for plumbing tri-power set-ups, dual inlet...
MPN: 6151MRG
Mr Gasket 6151MRG Mr. Gasket Tee Style Fuel Block with 3 Outlets
$65.42
BCZG_6151MRG
Air and Fuel Delivery
Fuel Injection System and Related Components
Fuel Line Junction Block
Triple Outlet. The classic T design for today's needs. These are precesion die-cast, chrome plated blocks, ideal for plumbing tri-power setups, dual inlet Holleys...
MPN: 1929MRG
Mr Gasket 1929MRG Mr. Gasket Carburetor Adapter Kit
$43.31
BCZG_1929MRG
Air and Fuel Delivery
Carburetion
Carburetor Adapter Plate
Mr. Gasket carburetor adapter kits install quickly and easily. Gaskets, studs, nuts and washers are included. Adapters are made of die-cast aluminum.
MPN: 1937MRG
Mr Gasket 1937MRG Mr.Gasket Carb Adapter Kit-Large Holley to Small Rochester 4-Bolt(both 2-Barrel)
$59.77
BCZG_1937MRG
Air and Fuel Delivery
Carburetion
Carburetor Adapter Plate
Carburetor Adapter - Mounts Holley 2300 Series Carburetor to Small Rochester 2 Barrel Intake. Also Can Be Inverted to Mount Small Rochester Carburetor to...
MPN: 1932
Mr Gasket 1932 Adapts 4-barrel Square Flange carburetors to spreadbore intake manifolds.
$55.53
BCZG_1932
Air and Fuel Delivery
Carburetion
Carburetor Adapter Plate
The Mr. Gasket Carburetor Adapter Kit allows you to install a square flange carburetor like a Holley 4150,4160, Edelbrock, Carter AFB, etcetera,, onto a...
MPN: 1933
Mr Gasket 1933 Adapter squarebore 4-Barrel carburetors to 2-Barrel squarebore intake manifolds.
$56.44
BCZG_1933
Air and Fuel Delivery
Carburetion
Carburetor Adapter Plate
This Mr. Gasket Carburetor Adapter Kit adapter 4-bolt, 4-barrel carburetors to 4-bolt, 2-barrel intake manifolds or 4-bolt, 2-barrel carburetors to 4-bolt, 4-barrel intake manifolds....
MPN: 6652
Mr Gasket 6652 Converts Street Scoop from Single 4-Barrel to Dual 4-Barrel Carburetors
$138.29
BCZG_6652
Air and Fuel Delivery
Engine Air Intake Scoop
Fuel Injection System and Related Components
Mr. Gasket now offers two conversion kits to convert the popular, award winning Street Scoops from one 4-barrel into two 4-barrel carburetion and vice...
MPN: 6653
Mr Gasket 6653 Converts Street Scoop from Dual 4-Barrel to Single 4-Barrel Carburetor.
$270.72
BCZG_6653
Air and Fuel Delivery
Engine Air Intake Scoop
Fuel Injection System and Related Components
Converts Mr. Gasket 6650 Street Scoop from dual 4-barrel to single 4-barrel. Includes 4 inch tall cast aluminum adapter, carburetor stud, and throttle rod....
MPN: 8008MRG
Mr Gasket 8008MRG Mr. Gasket Air Scoop - Double Barrel - Shotgun Style Scoop - Polished Aluminum
$1,043.68
BCZG_8008MRG
Air and Fuel Delivery
Engine Air Intake Scoop
Fuel Injection System and Related Components
Polished aluminum double barrel shotgun style scoop. Scoop comes with fully functional butterfly mechanism with carburetor linkage arm. Includes the filter and element and...
MPN: 6650G
Mr Gasket 6650G Fits Single & Dual 4-Barrel Carburetors with 5-1/8 Inch Neck
$676.67
BCZG_6650G
Air and Fuel Delivery
Engine Air Intake Scoop
Fuel Injection System and Related Components
Mr. Gasket Street Scoop provides the competition look of an Enderle style fuel injection air scoop used on nostalgia Top Fuel and Funny Cars....
