MPN: 31199
MSD 31199 Super Conductor Spark Plug Wire Set, 8 Cyl Multi-Angle Plug, Socket/HEI
$219.29
BCCX_31199
Dodge Challenger
Dodge Charger
Ford Mustang
Ignition
Ignition Wire and Related Components
Spark Plug Wire Set
Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and...
MPN: 82726
MSD 82726 Ignition Coil - Blaster - Chrysler V6 - Red - 6-Pack
$547.02
BCCX_82726
Direct Ignition Coil Kit
Dodge Challenger
Dodge Charger
Ignition
Ignition Coil
When it's time to tune up your late model Dodge, Chrysler or Jeep, trust the ignition experts at MSD to upgrade your factory coils....
MPN: 502ERL
Earl's Performance 502ERL Earl's Billet Oil Thermostat
$339.47
CFRL_502ERL
Cylinder Block Components
Dodge Challenger
Dodge Charger
Engine
Engine Oil Pump
Ford Mustang
These billet aluminum units facilitate quick oil warm up. Opening starts at 160*F (71.1C) and they are fully open at 180*F (82.2C).
MPN: 510ERL
Earl's Performance 510ERL Earl's Sandwich Filter Adapter
$217.36
CFRL_510ERL
Dodge Challenger
Dodge Charger
Engine
Engine Oil Filter Remote Mounting Kit
Filters
Ford Mustang
These units allow the adaptation of an oil cooler to any engine while maintaining the stock oil filter location.
MPN: HEMI0005ERL
Earl's Performance HEMI0005ERL Earl's Gen III Hemi Supercharger Intercooler Manifold
$766.43
CFRL_HEMI0005ERL
Air and Fuel Delivery
Dodge Challenger
Dodge Charger
Supercharger Coolant Manifold
Turbocharger, Supercharger and Ram Air
The Supercharged Gen III Hemi engine has a relatively large intercooler manifold on the back of the supercharger. The factory manifold may cause clearance...
MPN: 961988ERL
Earl's Performance 961988ERL Earl's O.E. Fuel Line EFI Quick Connect 1/2" Tube to -8 AN Male - Stainless
$39.83
CFRL_961988ERL
Air and Fuel Delivery
Dodge Challenger
Dodge Charger
Fuel Hose Fitting
Hardware, Fasteners and Fittings
These adapter fittings allow an easy way to re-use existing OE fuel hoses, fuel filters, and other components when doing an engine swap, or...
MPN: 1178ERL
Earl's Performance 1178ERL Earl's Spin On Adapter
$138.25
CFRL_1178ERL
Dodge Challenger
Dodge Charger
Engine
Engine Oil Filter Adapter
Ford Mustang
Hardware, Fasteners and Fittings
Many installations, particularly oil cooler installations, require the oil filter to be relocated. Earl's has bypass adapters for most spin-on applications w/ 3/4"-16 Threads.
MPN: HEMI0001ERL
Earl's Performance HEMI0001ERL Earl's Oil Filter Block-Off - Fits M22 x 1.5 Filters
$60.13
CFRL_HEMI0001ERL
Dodge Challenger
Dodge Charger
Engine
Engine Oil Filter
Filters
The factory oil filter location on the Gen III Hemi may interfere with the crossmember or suspension in some engine swaps. These block-off plates...
MPN: HEMI0003ERL
Earl's Performance HEMI0003ERL Earl's Oil Filter Relocation Kit - Mopar Gen III Hemi - Fits M22 x 1.5 Filters
$342.25
CFRL_HEMI0003ERL
Dodge Challenger
Dodge Charger
Engine
Engine Oil Filter Remote Mounting Kit
Filters
The factory oil filter location on the Gen III Hemi may interfere with the crossmember or suspension in some engine swaps. These block-off plates...
MPN: 1179ERL
Earl's Performance 1179ERL Earl's Remote Oil Filter Adapter
$247.60
CFRL_1179ERL
Dodge Challenger
Dodge Charger
Engine
Engine Oil Filter Adapter
Ford Mustang
Hardware, Fasteners and Fittings
Earl's oil filter adapter allows you to relocate the oil filter to another location for better access or extra clearance. This adapter fits in...
MPN: 280021ERL
Earl's Performance 280021ERL Solo-Bleed® - 3/8"-24 Thread x 1.172" Long - Pair
$68.33
CFRL_280021ERL
Brake
Brake Bleeder Screw
Chevrolet Camaro
Dodge Challenger
Dodge Charger
Ford Mustang
Hardware, Fasteners and Fittings
Brake bleeding has always been an inconvenient and messy job. Commercial shops typically use an expensive pressure bleeder-which, unless used properly, can introduce air...
MPN: 280022ERL
Earl's Performance 280022ERL Solo-Bleed® - 10mm x 1.0 Thread x 27mm Long - Pair
$68.33
CFRL_280022ERL
Brake
Brake Bleeder Screw
Chevrolet Camaro
Dodge Challenger
Ford Mustang
Hardware, Fasteners and Fittings
Brake bleeding has always been an inconvenient and messy job. Commercial shops typically use an expensive pressure bleeder—which, unless used properly, can introduce air...
MPN: 280029ERL
Earl's Performance 280029ERL Solo-Bleed® - 10mm x 1.5 Thread x 27mm Long - Pair
$88.53
CFRL_280029ERL
Brake
Brake Bleeder Screw
Chevrolet Camaro
Dodge Challenger
Ford Mustang
Hardware, Fasteners and Fittings
Brake bleeding has always been an inconvenient and messy job. Commercial shops typically use an expensive pressure bleeder—which, unless used properly, can introduce air...
MPN: 06016BNOS
NOS/Nitrous Oxide System 06016BNOS NOS Single Fogger Wet Nitrous System - Mopar
$1,385.14
BHHV_06016BNOS
Air and Fuel Delivery
Dodge Challenger
Dodge Charger
Nitrous Oxide Injection System Kit
Service Kits
NOS now has new Single Fogger EFI Nitrous Systems for GM, Ford, and Mopar. These new black systems give you the easiest way to...
MPN: FC2002-8405
Leed Brakes FC2002-8405 Power Front Kit with Plain Rotors and Zinc Plated Calipers
$2,291.95
HBCJ_FC2002-8405
Brake
Brake Conversion Kit
Brakes
Dodge Challenger
Dodge Charger
Service Kits
Add the safety, reliability and performance of disc brakes to your vehicle with our manual drum to disc brake conversion. In this kit you...
MPN: 15184NOS
NOS/Nitrous Oxide System 15184NOS NOS EFI Nitrous Wet Plate - Mopar
$467.34
BHHV_15184NOS
Air and Fuel Delivery
Dodge Challenger
Dodge Charger
Nitrous Oxide Injection System
Nitrous Oxide Plate
The NOS "Plate Only" kit allows our customers to build a custom nitrous system for their 5.7L and 6.1L Gen III Hemi powered muscle...
MPN: 05184BNOS
NOS/Nitrous Oxide System 05184BNOS NOS Plate Wet Nitrous System - Mopar
$1,893.64
BHHV_05184BNOS
Air and Fuel Delivery
Dodge Challenger
Dodge Charger
Nitrous Oxide Injection System Kit
Service Kits
NOS now has a complete black wet nitrous systems for your 2009-2019 5.7L and 2005-2010 6.1L Dodge Challenger, Charger, Magnum, and Chrysler 300C Hemi...
MPN: 751186ERL
Earl's Performance 751186ERL Earl's O.E. Fuel Line EFI Quick Connect
$58.16
CFRL_751186ERL
Air and Fuel Delivery
Dodge Challenger
Dodge Charger
Fuel Hose Fitting
Hardware, Fasteners and Fittings
The Earl's Vapor Guard™ product line has been expanded to include O.E. fuel line quick connect fittings. These adapter fittings allow an easy way...
MPN: 05210BNOS
NOS/Nitrous Oxide System 05210BNOS NOS Plate Wet Nitrous System - Mopar
$2,038.92
BHHV_05210BNOS
Air and Fuel Delivery
Dodge Challenger
Dodge Charger
Nitrous Oxide Injection System Kit
Service Kits
Add 200+ Rear Wheel Horsepower (RWHP) to the already potent Gen III Hemi 6.2L supercharged Hellcat engine. Engineered & dyno tested nitrous system includes...
MPN: 07167NOS
NOS/Nitrous Oxide System 07167NOS NOS Sniper Plate Wet Nitrous System - Mopar
$1,322.18
BHHV_07167NOS
Air and Fuel Delivery
Dodge Challenger
Dodge Charger
Nitrous Oxide Injection System Kit
Service Kits
Sniper Wet EFI Nitrous Plate Kits give one of the most powerful bang-for-the-buck power adding solutions. Sniper nitrous kits are great for the budget...
MPN: 05182NOS
NOS/Nitrous Oxide System 05182NOS NOS Plate Wet Nitrous System - Mopar
$2,038.92
BHHV_05182NOS
Air and Fuel Delivery
Dodge Challenger
Dodge Charger
Nitrous Oxide Injection System Kit
Service Kits
Our NOS system includes everything needed to install extra power over the weekend. Along with all the nitrous and fuel related hardware, an NOS...
MPN: A84
Leed Brakes A84 8 inch dual power booster, 1 inch bore master (Zinc)
$668.06
HBCJ_A84
Brake
Brakes
Dodge Challenger
Dodge Charger
Hardware, Fasteners and Fittings
Power Brake Booster with Brake Master Cylinder
New 8" Dual Diaphragm zinc plated power brake booster kit. This 8" power booster is hand polished before a yellow zinc finish is applied...
MPN: 24-326438
Bilstein 24-326438 B6 Performance - Suspension Shock Absorber
$212.02
BBGL_24-326438
Dodge Challenger
Dodge Charger
Shock Absorber
Shocks and Struts
Suspension
Bilstein B6 Performance dampers are a performance upgrade to OE dampers designed to be paired with the OE factory spring. These dampers offer application...
MPN: 24-326421
Bilstein 24-326421 B6 Performance - Suspension Shock Absorber
$215.68
BBGL_24-326421
Dodge Challenger
Dodge Charger
Shock Absorber
Shocks and Struts
Suspension
Bilstein B6 Performance dampers are a performance upgrade to OE dampers designed to be paired with the OE factory spring. These dampers offer application...
MPN: 6130010
Hurst 6130010 2011-2023 Dodge Challenger SXT, GT, R/T, SRT8 models (see notes below)
$1,133.94
BCCS_6130010
Dodge Challenger
Suspension
Suspension Kit
Suspension, Springs and Related Components
The Hurst High-Performance Spring Kit is an excellent choice for firming up the handling of your car and giving it that Just Right stance....
MPN: 6370010
Hurst 6370010 Elite Series Logo Floor Mat Set
$396.74
BCCS_6370010
Body
Dodge Challenger
Floor
Floor Mat Set
Show off your Hurst pride with this 4 piece set of high quality embroidered Hurst logo floor mats. The embroidered Hurst logo on the...
MPN: 24-144780
Bilstein 24-144780 B6 Performance - Suspension Shock Absorber
$239.20
BBGL_24-144780
Dodge Challenger
Dodge Charger
Shock Absorber
Shocks and Struts
Suspension
Bilstein B6 Performance dampers are a performance upgrade to OE dampers designed to be paired with the OE factory spring. These dampers offer application...
MPN: 24-144766
Bilstein 24-144766 B6 Performance - Suspension Shock Absorber
$203.86
BBGL_24-144766
Dodge Challenger
Dodge Charger
Shock Absorber
Shocks and Struts
Suspension
Bilstein B6 Performance dampers are a performance upgrade to OE dampers designed to be paired with the OE factory spring. These dampers offer application...
MPN: 16797
Derale 16797 PWM Fan Controller, Flush surface mount sending unit.
$379.87
BDST_16797
Belts and Cooling
Chevrolet Camaro
Cooling Fan, Clutch and Motor
Dodge Challenger
Dodge Charger
Engine Cooling Fan Controller
Ford Mustang
the electric fans often only run between 40-60% to keep your engine cool. Additional benefits include, reduced fan speeds which means reduced fan noise,...
MPN: 16789
Derale 16789 High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
$362.54
BDST_16789
Belts and Cooling
Chevrolet Camaro
Cooling Fan, Clutch and Motor
Dodge Challenger
Dodge Charger
Engine Cooling Fan Controller
Ford Mustang
Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100%...
MPN: 13102
Derale 13102 4 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit
$89.68
BDST_13102
Automatic Transmission Oil Cooler Kit
Belts and Cooling
Dodge Challenger
Dodge Charger
Ford Mustang
Radiators, Coolers and Related Components
This Tube & Fin transmission cooler features 1/2" copper tubing expanded into aluminum cooling fins and include embossed turbulators which serve to agitate fluid...
MPN: 16749
Derale 16749 Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
$125.12
BDST_16749
Belts and Cooling
Chevrolet Camaro
Cooling Fan, Clutch and Motor
Dodge Challenger
Dodge Charger
Engine Cooling Fan Controller
Ford Mustang
This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps....
MPN: 15602
Derale 15602 10 Row Series 10000 Stack Plate Universal Engine Oil Cooler Kit Sandwich Adapter
$295.68
BDST_15602
Belts and Cooling
Chevrolet Camaro
Dodge Challenger
Dodge Charger
Engine Oil Cooler Kit
Ford Mustang
Radiators, Coolers and Related Components
Featuring our top-of-the-line 10 row Stack Plate cooler, this unit is perfect for mild to wild street applications. The oven-brazed all-aluminum oil cooler can...
MPN: 33502
Derale 33502 13 Row Series 8000 Plate & Fin Cooler, 11/32"
$100.29
BDST_33502
Automatic Transmission Oil Cooler
Belts and Cooling
Dodge Challenger
Dodge Charger
Ford Mustang
Radiators, Coolers and Related Components
A step up from Tube & Fin type coolers, this Plate and Fin cooler features strong furnace-brazed construction, 7/8" wide plates, 3/4" embossed turbulators...
MPN: 16759
Derale 16759 Adjustable Electric Fan Controller, Push In Radiator Probe
$128.50
BDST_16759
Belts and Cooling
Chevrolet Camaro
Cooling Fan, Clutch and Motor
Dodge Challenger
Dodge Charger
Engine Cooling Fan Controller
Ford Mustang
This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps....
MPN: 51608
Derale 51608 16 Row Series 10000 Stack Plate Oil Fluid Cooler, -8AN
$243.96
BDST_51608
Belts and Cooling
Chevrolet Camaro
Dodge Challenger
Dodge Charger
Engine Oil and Automatic Transmission Oil Cooler
Ford Mustang
Radiators, Coolers and Related Components
Our most efficient heat exchanger, the all aluminum 16 row Stacked Plate cooler features sturdy furnace brazed construction, full 2" deep turbulator-equipped plates and...
