Lakewood

Special Order

Lakewood

MPN: LK4000K

Lakewood LK4000K Fits Tremec TKX, TKO, Muncie, Saginaw, and Borg Warner T10 Transmissions

$773.02

OEM starters are recommended for ease of fitment. It is very important that the tooth count (153 or 168) of the starter match the...

Special Order

Lakewood

MPN: LK5000K

Lakewood LK5000K Fits Tremec TKX and TKO, Muncie, Saginaw, and Borg Warner T10 Transmissions

$754.26

The bellhousing (#LK4000), clutch fork boot (#50351), inspection cover (#50353), and mounting hardware kit (#50369) are also available individually and can be found below...

Special Order

Lakewood

MPN: 50367

Lakewood 50367 Fits Lakewood cast bellhousing LK8000 or LK9000 for Small Block Ford

$83.29

Help keep unwanted dirt, dust and moisture from entering the bellhousing with the Lakewood clutch fork cover.

Special Order

Lakewood

MPN: 50376

Lakewood 50376 For SBF using GM TRANSMISSIONS - .594 ID

$167.06

This Lakewood Roller Pilot Bearing is a must when swapping or adapting a transmission to an engine application it wasn't intended for. Roller pilot...

Special Order

Lakewood

MPN: 15901LKW

Lakewood 15901LKW Bellhousing Adapter - GM

$326.29

Adapts GM LS and LT engine bellhousing bolt patterns to conventional Small Block and Big Block Chevrolet bellhousing bolt pattern

Special Order

Lakewood

MPN: 15920LKW

Lakewood 15920LKW These bellhousing dowel pins have a .625" diameter and .007" offset and fit GM.

$132.94

A must when accurately dialing in bellhousings, these Lakewood bellhousing locator dowel pins dial in a misaligned register bore which can cause missed shifts...

Lakewood

MPN: 18000

Lakewood 18000 Drive Shaft Safety Loop

$121.83

Feel safe and secure with Lakewood drive shaft safety loop. The safety loop is NHRA and IHRA approved. The 4 piece design is made...

Special Order

Lakewood

MPN: 18017

Lakewood 18017 1979-2003 Ford/Mercury - Mustang/Capri

$139.41

Feel safe and secure with Lakewood drive shaft safety loop in your 1979 to 2003 Mustang. The safety loop is NHRA and IHRA approved....

Special Order

Lakewood

MPN: 50378

Lakewood 50378 For Gen III Hemi, SBM, BBM Using GM Transmissions - .594 ID

$150.31

This Lakewood Roller Pilot Bearing is a must when swapping or adapting a transmission to an engine application it wasn't intended for. Roller pilot...

Special Order

Lakewood

MPN: 50397

Lakewood 50397 Bellhousing Bolt Kit - GM LS/LT to T-56

$121.24

Service Part for Lakewood #LK5100K bellhousing and Holley #319-575 transmission installation kit

Special Order

Lakewood

MPN: LK8000K

Lakewood LK8000K Bellhousing Kit - Small Block Ford

$887.51

This Lakewood cast aluminum bellhousing connects Small Block Ford engines to Ford-style T-5 transmission. Designed as a compact, lightweight option for transmission swaps, it...

Special Order

Lakewood

MPN: LK9000

Lakewood LK9000 Fits Ford style TKX, TKO 500/600 or TR3550 Transmissions

$787.47

This Lakewood cast aluminum bellhousing connects Small Block Ford engines to Ford style TKX, TKO 500/600 or TR3550 transmission. Designed as a compact, lightweight...

Special Order

Lakewood

MPN: LK9000K

Lakewood LK9000K Fits Ford style TKX, TKO 500/600 or TR3550 Transmissions

$874.25

This Lakewood cast aluminum bellhousing connects Small Block Ford engines to Ford style TKX, TKO 500/600 or TR3550 transmission. Designed as a compact, lightweight...

Special Order

Lakewood

MPN: 18020

Lakewood 18020 Fits 1982-1992 Chevrolet/Pontiac - Camaro/Firebird

$249.86

Easy bolt in design, complete with all hardware and instructions. Lakewood driveshaft safety loops allow easy bolt-on installation without modification. NHRA and IHRA legal...

Special Order

Lakewood

MPN: 20140

Lakewood 20140 Lower Rear Control Arms - Camaro/Firebird 1982-2002

$446.42

Lakewood lower rear control arms help eliminate flex common with OE control arms. Constructed with box steel tubing with greaseable polyurethane bushings. These arms...

Special Order

Lakewood

MPN: 15976

Lakewood 15976 Chevrolet Big Block and Small Block Bronze Factory Type Replacement Piot Bearing

$72.94

This Lakewood bronze (factory-style) bushing improves shifting, and helps reduce parasitic drag and transmission wear. Worn pilot bushings can cause hard shifting and increase...

Special Order

Lakewood

MPN: 50361

Lakewood 50361 Fits Lakewood LK6000 or LK7000 bellhousing with 10" clutch fork

$71.96

This Lakewood Clutch Fork Pivot Bracket is made of steel with a clear zinc finish. Designed for Lakewood LK6000 and LK7000 bellhousing for SBM/BBM...

Special Order

Lakewood

MPN: 50362

Lakewood 50362 Fits Lakewood LK6000 and LK7000 bellhousing with 12" clutch fork

$68.33

This Lakewood Clutch Fork Pivot Bracket is made of steel with a clear zinc finish. Designed for Lakewood LK6000 or LK7000 bellhousing for SBM/BBM...

Special Order

Lakewood

MPN: 50370

Lakewood 50370 Fits LK6000 and LK7000 bellhousing for SBM/BBM

$119.39

Bellhousing Bolt Kit for LK6000 or LK7000 installation on Small Block or Big Block Mopar engines.

Special Order

Lakewood

MPN: 24095LKW

Lakewood 24095LKW Fits Gen III Hemi Engine Swap on Dodge D100/D150 & Other Factory Applications

$48.47

Lakewood engine mounts are ideal for engine swaps that use stock style mounts, or to replace worn mounts in factory applications. The rubber portion...

Special Order

Lakewood

MPN: 40100

Lakewood 40100 Fits 1967-1989 GM - A-Body/G-Body/S10/S15

$180.03

The 40100 by Lakewood is a 90/10 front shock used on GM A and G body vehicles. These are designed to provide maxim front...

Special Order

Lakewood

MPN: 40101

Lakewood 40101 Fits 1955-1991 GM/Ford/Mercury

$180.13

Fits 14.75 in/9.51 in, stud/eyelet mounts.

Special Order

Lakewood

MPN: 24087

Lakewood 24087 MUSCLE MOTOR MOUNT-GM

$121.08

Lakewood stamped steel motor mounts are the ideal alternative to noisy, vibrating solid mounts. Heavy gauge steel frame and engine brackets are vulcanized to...

Special Order

Lakewood

MPN: 24084

Lakewood 24084, Motor Mount, Steel/Hard Rubber, Chevy Passenger Car V8, Each

$121.08

Lakewood stamped steel motor mounts are the ideal alternative to noisy, vibrating solid mounts. Heavy gauge steel frame and engine brackets are vulcanized to...

Special Order

Lakewood

MPN: 22026

Lakewood 22026 Universal - 30" Long - Black Steel - Pair

$398.29

Lakewood universal heavy duty traction bars are designed to fit most leaf spring applications. These bars strengthen rear suspension and reduce wheel-hop. They are...

Special Order

Lakewood

MPN: 23014

Lakewood 23014 1310 Style, 3.219" yoke span and 1.063" cap diameter. Non-Greasable. 4 plain

$161.68

Lakewood universal replacement U-Joints are fatigue and wear-resistant, the ultimate in strength! Designed with ultra-durable chrome-nickel-moly alloy cross and caps, and special high-carbon steel...

Lakewood

MPN: 20570

Lakewood 20570 Replacement U-Bolt Kit- 3/8" Diameter - 3-1/2" Center to Center

$90.42

3/8" Diameter 3.5" center to center. Lakewood U-Bolts fit Lakewood traction bars and many other bars used on leaf spring cars. Kit includes high...

Special Order

Lakewood

MPN: 20580

Lakewood 20580 J-Bolt Kit - 1-1/2" Diameter

$181.51

Lakewood J-Bolt kits are for use with our competition series suspension bars. Kits include enough components for one bar.

Special Order

Lakewood

MPN: LK6000

Lakewood LK6000 Bellhousing - Big Block Mopar

$745.69

Connects Big Block Mopar to Mopar 3-Speed, Mopar 4-Speed, or Ford Style TKX and TKO Transmissions

Special Order

Lakewood

MPN: 50357

Lakewood 50357 CLUTCH FORK BOOT, SBM/BBM/GEN 3 HEMI

$86.43

Lakewood CLUTCH FORK BOOT, SBM/BBM/GEN 3 HEMI

Special Order

Lakewood

MPN: 50360

Lakewood 50360 Inspection COVER, SBM/GEN 3 HEMI

$121.08

This Lakewood Inspection COVER is powder-coated black and fits Lakewood bellhousing #LK7000 for SBM/GEN 3 HEMI.

Special Order

Lakewood

MPN: 50356

Lakewood 50356 Inspection Cover - BB Mopar

$121.24

This Lakewood Inspection cover is powder-coated black and fits Lakewood bellhousing #LK6000 for Big Block Mopar.

Special Order

Lakewood

MPN: LK6000K

Lakewood LK6000K Bellhousing Kit - Big Block Mopar

$965.11

Included alignment ring sizes are 4.345 inch, 4.807 inch, and 4.850 inch I.D. (inside dimension). Also included in the kit: Clutch fork brackets, clutch...

Special Order

Lakewood

MPN: 40500

Lakewood 40500 Fits 1982-1992 Chevrolet/Pontiac - Camaro/Firebird

$469.08

Lakewood front 70/30 struts improve handling on both street and strip, when quick front end lift is not needed. For med-high horsepower vehicles with...