proform

Proform

MPN: 66792

Proform 66792 Engine Piston Top Dead Center Locator Tool

$19.15

This tool provides a positive stop for the piston when locating top dead center. It screws into the spark plug hole.

Special Order

Proform

MPN: 66793

Proform 66793 Engine Valve Spring Check Spring

$19.92

These light-pressure springs make the assembly of components much easier. They provide enough pressure to hold the valve assembly together when checking camshaft figures,...

Special Order

Proform

MPN: 66795

Proform 66795 Spark Plug Indexing Tool

$26.61

High compression engines run better with the spark plugs indexed. This way spark plugs can be properly set so there is no piston dome...

Special Order

Proform

MPN: 66796

Proform 66796 Works on Most Sizes of Studs and Broken Bolts

$56.76

Easily allows removal of stubborn studs, such as rocker or cylinder head studs.

Proform

MPN: 66797

Proform 66797 Dial Indicator Stand

$85.51

This will go over cylinder bores up to 4-1/2in. This is used to check piston-to-deck clearance, and it is magnetic so it holds firmly...

Special Order

Proform

MPN: 66798

Proform 66798 Fits Up To 4.500 Inch Cylinder Bores

$65.28

This will go over cylinder bores up to 4-1/2in. This is used to check piston-to-deck clearance. Does not have a magnetic base. Dial indicator...

Special Order

Proform

MPN: 66799

Proform 66799 Engine Piston Top Dead Center Locator Tool

$31.07

Easily checks top dead center by bolting down across cylinder bore. (Used w/ heads off)

Special Order

Proform

MPN: 66801

Proform 66801 Air Cleaner Assembly

$70.00

Fits 5-1/8in and 4-7/32in Carb Necks. Has recessed base for low profile fit over carburetor. Includes 4-7/32in Adapter, 2 Plated Studs, Tri-Star Wing Nut,...

Special Order

Proform

MPN: 66802

Proform 66802 Air Cleaner Assembly

$50.43

Fits 5-1/8" and 4-7/32" Carb Necks. Has recessed base for low profile fit over carburetor. Includes 4-7/32" Adapter, Plated Studs, Tri-Star Wing Nut, PCV...

Special Order

Proform

MPN: 66804

Proform 66804 2-1/4 Inch Paper Element, Mounting Stud and Wing Nut Included

$63.33

Fits 5-1/8in and 4-7/32in Carb Necks. The recessed area in the center of the top is chrome plated, the bottom is chrome plated, not...

Special Order

Proform

MPN: 66806

Proform 66806 Fits 7/16 Inch Studs for BB Chevy Engines

$32.62

Proper push rod length is absolutely critical for peak performance - minimizing bent or broken valve stems, guide wear, and energy-wasting valve side-loading friction.

Special Order

Proform

MPN: 66808

Proform 66808 Air Filter Housing

$79.90

Lower your air cleaner for more hood clearance.

Special Order

Proform

MPN: 66809

Proform 66809 Air Cleaner Assembly

$132.11

SAVE critical front-end weight with PROFORM's race-winning super-light air cleaner kits! This clear anodized finish kit includes paper filter and the popular deeply-recessed base.

Special Order

Proform

MPN: 66810

Proform 66810 Carburetor Air Cleaner Base Only

$79.88

Lower your air cleaner for more hood clearance. Black anodized aluminum finish.

Special Order

Proform

MPN: 66811

Proform 66811 220 Volt AC Adapter for Electric Ring Filer 66759

$35.06

220 Volt AC Adapter for Electric Ring Filer 66759

Special Order

Proform

MPN: 66812

Proform 66812 120 Volt AC Adapter for Electric Ring Filer 66758

$35.06

120 Volt AC Adapter for Electric Ring Filer 66758

Special Order

Proform

MPN: 66815

Proform 66815 2 Inch Paper Element, Mounting Stud and Wing Nut Included

$46.07

Fits 5-1/8in Carb Necks. Includes Plated Studs, Wing Nut, PCV Attachment for use on Pollution Controlled Motor V ehicles, 2in Paper Filter and Instructions.

Special Order

Proform

MPN: 66821

Proform 66821 Spark Plug Thread Chaser Tool; Fits 14mm and 18mm Threads; Steel Material

$18.95

Spark Plug Thread Chaser Tool; Double-Ended Style; Fits 14mm and 18mm Spark Plug Hole Threads; Made from High-Quality Steel Material; Black-Oxide Finish; Sold Each

Special Order

Proform

MPN: 66823

Proform 66823 Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 413

$63.71

PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The...

Special Order

Proform

MPN: 66824

Proform 66824 Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 414

$56.35

PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The...

Special Order

Proform

MPN: 66825

Proform 66825 Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 414

$63.71

PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The...

Special Order

Proform

MPN: 66826

Proform 66826 Fits GM LS Engines with 3/8" Wide Flange

$63.71

Each PROFORM Grade 8 Header Bolt is permanently assembled with a pair of special washers. When the bolt is torqued to 28+ ft-lbs, the...

Special Order

Proform

MPN: 66827

Proform 66827 Exhaust Header Bolt

$56.35

PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The...

Special Order

Proform

MPN: 66829

Proform 66829 Engine Camshaft Checker Tool

$141.38

No more fumbling with a magnetic base and a dial indicator to measure cam lift. This fixture attaches to a 1/4in-20in valve cover bolt...

Special Order

Proform

MPN: 66830

Proform 66830 Engine Camshaft Checker Tool

$146.70

No more fumbling with a magnetic base and a dial indicator to measure cam lift. This fixture maintains and holds the dial indicator and...

Special Order

Proform

MPN: 66831

Proform 66831 Includes 100cc Burette and Reads In 2cc Increments

$312.59

This is the kit you need to accurately cc most cylinder head combustion chambers. Includes a precision glass 100 cc burette with easy-to-read 0.2cc...

Proform

MPN: 66832

Proform 66832 Made From Quality Steel and has a Blue Powdercoat Finish

$199.84

This heavy-duty, simple-to-use, manual valve spring compressor makes short work of even monstrous springs. The compressor arm slides for adjustment, employing a locking pin...

Special Order

Proform

MPN: 66833

Proform 66833 Engine Piston Dome Thickness Checking Tool

$191.86

Who would dare to modify piston domes or to fly-cut valve pockets without knowing how much material there is to work with? This simple...

Special Order

Proform

MPN: 66834

Proform 66834 Engine Valve Spring Checker

$132.49

Here's the affordable, portable way to test springs. The hex-design body is very versatile: use it in a vise or an arbor press. These...

Special Order

Proform

MPN: 66835

Proform 66835 Engine Valve Spring Checker

$126.43

Here's the affordable, portable way to test springs. The hex-design body is very versatile: use it in a vise or an arbor press. These...

Special Order

Proform

MPN: 66836

Proform 66836 Engine Valve Spring Checker

$334.23

Here's the affordable, portable way to test springs. The hex-design body is very versatile: use it in a vise or an arbor press. The...

Special Order

Proform

MPN: 66837

Proform 66837 Engine Valve Spring Checker

$174.34

Here's the affordable, portable way to test springs. The hex-design body is very versatile: use it in a vise or an arbor press. These...

Special Order

Proform

MPN: 66838

Proform 66838 Engine Camshaft Checker Tool

$165.95

With O-rings on each end to assure securing positioning, this unit slides down into the lifter bore and sits atop the camshaft for accurate...

Special Order

Proform

MPN: 66839

Proform 66839 Dual Gauge Model with14mm Spark Plug Hole Adapter

$129.44

This dual-gauge leakdown tester measures the condition of your head gaskets, piston rings, and valves. The gauge records incoming air pressure, and the right...