MPN: 30-3302
AEM Electronics 30-3302 AEM V3 Water/Methanol Standard Kit (No Reservoir)
$755.37
FDDP_30-3302
AEM Electronics
Air and Fuel Delivery
Service Kits
Water Injection System Kit
The second controller (Kit PN 30-3350) features a multiple input desig
MPN: 30-3303
AEM Electronics 30-3303 AEM V3 Water/Methanol HD Kit (No Reservoir)
$886.01
FDDP_30-3303
AEM Electronics
Air and Fuel Delivery
Service Kits
Water Injection System Kit
The second controller (Kit PN 30-3350) features a multiple input desig
MPN: 30-3350
AEM Electronics 30-3350 Multi-Input N/A Controller 0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP
$830.63
FDDP_30-3350
AEM Electronics
Air and Fuel Delivery
Service Kits
Water Injection System Kit
Note: FOR OPTIMUM RESULTS, ALL WATER/METHANOL INJECTION SYSTEMS AND FLOW GAUGES SHOULD BE RUN WITH AN WMI INLINE FILTER (PN 30-3003). For additional insurance...
MPN: 30-3313
AEM Electronics 30-3313 Includes 2 Complete Injector Assemblies and 2 sets of Swirl Generators
$163.23
FDDP_30-3313
AEM Electronics
Air and Fuel Delivery
Service Kits
Water Injection System Kit
Replacement V3 Water/Methanol Injectors (Qty 2), Includes Interchangeable Swirl Generators for 250cc, 500cc, & 1000cc of flow for each injector
MPN: 30-3301
AEM Electronics 30-3301 40 PSI Max HD Controller - 5 Gallon Reservoir
$1,033.69
FDDP_30-3301
AEM Electronics
Air and Fuel Delivery
Service Kits
Water Injection System Kit
The AEM Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures...
MPN: 30-3351
AEM Electronics 30-3351 0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP, 5 Gallon
$1,033.69
FDDP_30-3351
AEM Electronics
Air and Fuel Delivery
Service Kits
Water Injection System Kit
Note: FOR OPTIMUM RESULTS, ALL WATER/METHANOL INJECTION SYSTEMS AND FLOW GAUGES SHOULD BE RUN WITH AN WMI INLINE FILTER (PN 30-3003). For additional insurance...
MPN: 30-3352
AEM Electronics 30-3352 Multi-Input N/A Controller 0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP
$738.33
FDDP_30-3352
AEM Electronics
Air and Fuel Delivery
Service Kits
Water Injection System Kit
AEM's Multi Input controller design enables users to install Water/Methanol Injection on high compression naturally aspirated vehicles (NA) via the MAF/IDC settings. The Multi-Input...
MPN: 30-3300
AEM Electronics 30-3300 35 PSI Max Standard Controller - 1.15 Gallon Reservoir
$851.93
FDDP_30-3300
AEM Electronics
Air and Fuel Delivery
Service Kits
Water Injection System Kit
These new controllers retain the "Boost Safe" injection failsafe system, which is an output that will activate if there is a short, loss of...
